There are a few SUV RVing-related news items that I’ve come across recently that I wanted to give my thoughts on:

1. A new hardshell rooftop tent on the market

I’m a big fan of hardshell rooftop tents (RTTs). They seem to be faster and easier to set up than the soft-sided ones, plus they’re more aerodynamic and therefore less likely to negatively impact your gas mileage. As reported over at GearJunkie, South African rooftop tent company Eezi-Awn has come out with its first hard-shell RTT, the Stealth:

Equipt is the sole US retailer of the tent. Retailing for $3,900, it is definitely extremely pricey, as most hardshell tents are, but it sure looks awesome. One other hardshell RTT that has come across my radar recently is the Roofnest Sparrow, which checks in at a more reasonable (but still spendy) $2,095.

2. New Toyota concept car is the ultimate SUV RVing vehicle

Toyota just released info on its latest concept car. It’s an SUV called the FT-4X, and Outside magazine called it “an REI store on wheels” and went on to explain:

“The door handles? They’re removable water bottles. The radio? It’s removable, too, and includes a battery so it can stream Spotify in camp. The center armrest is a North Face sleeping bag, the rearview-mirror-mounted camera is a removable GoPro Hero Session, and the dome light is a removable LED flashlight and lantern.”

The rear seats fold down perfectly flat, and the vehicle’s boxy interior looks very roomy and reminiscent of a Honda Element.

The SUV has a lot of other interesting little features, and you can read about them all over at Outside. Here’s a picture gallery (all photos from Toyota):

3. The Camperbox car bed

I’m not so sure about this one. It’s a current Kickstarter project and is basically a pre-made bed that you can insert into the back of your SUV, car, van, etc.:

First off, it’s relatively expensive at $157. Second, the vehicle in the GIF above shows a rear cargo area that’s already flat. You could just roll out your sleeping pad or mattress on the floor itself. I guess the real benefit of something like this would be that it gives you space for your gear to go underneath, but you could easily make something like this out of plywood and 2×4 lumber for $20. Third, if your vehicle does not have a sleeping surface that is already flat enough for something like this to work, then you’d have to prop it up by sticking pieces of wood or something underneath the ends. I dunno, I suppose this could be useful for some people in some situations, but I don’t think it’s the best solution. You’re better off building something that is customizes for your specific vehicle.

What are your thoughts on these three little news tidbits?

I just put the finishing touches on a downloadable/printable journal for SUV RVing, vandwelling, overlanding, road tripping, etc. It’s free and you can download it below.

The idea is that you download the PDF, print the necessary quantities of
the pages you need, punch holes in them, and stick them in a three-ring
binder. Take the binder with you on your trips and jot down the relevant information as desired.

After each page in the journal is an example page with red text that will help you better understand what each field is for. These pages do not need to be printed.

The printable pages in the journal include:

• A few different kinds of blank pages for notes
• Campsite log
• Hiking log
• Expense log
• Vehicle maintenance log
• Vehicle mileage log
• Journaling page
• Fuel expense log
• “Trips at a glance” page
• Blank to-do list
• Blank shopping list
• Location notes page
• “Week at a glance” page
• “Month at a glance” page

Again, you just need to print out the pages you’re interested in.

In addition to the pages in the journal, I also recommend printing a single-page year-at-a-glance calendar here.

**Click here to view/download the journal (PDF; 170 kB).**

This video (also embedded below) goes into a bit more detail about the journal and shows you how I’ve got mine arranged in a binder along with tabbed dividers, etc.

I always travel solo on my SUV RVing adventures, and I use the REI Camp Bed 3.5 Self-Inflating Sleeping Pad as a mattress. Because I only camp alone, the need for a 2-person mattress to fit into the back of my SUV never came up, but I was recently reminded of them when reading an article on Adventure Journal that introduced me to the Klymit Insulated Double V Sleeping Pad, which retails for $160ish:

It’s 47 inches wide. The narrowest portion of the rear area of my SUV (the spot between the two wheel wells) is 44 inches, but I think the mattress would fit just fine with a little bit of bunching on the sides. Because I have what is probably one of the smallest SUVs out there (a RAV4), my guess is that this and other two-person mattresses would fit in most larger SUVs.

I was vaguely aware that 2-person sleeping pads or camp mattresses existed, but I decided to dive deeper into the realm and see what other offerings I could find on the market for those of you who do travel with a significant other. These pads/mattresses are listed from narrowest to widest.

• Exped SynMat HL Duo Sleeping Pad ($299) – 41 x 72 x 2.8 inches
• Exped SynMat Duo Sleeping Pad (Medium) ($250) – 41.3 x 72 x 32.3 x 2.8 inches
• Cabela’s Double Inflating Sleeping Pad ($130) – 46 x 72 x 3 inches
• Klymit Insulated Double V ($159) – 47 x 74 x 3 inches
• Klymit Double V ($129) – 47 x 74 x 3 inches
• ALPS Mountaineering Lightweight Self Inflating Sleeping Pad – Double ($150) – 47 x 75 x 3 inches
• Cabela’s Deluxe Camp Bed (Extra Large) ($150) – 48 x 78 x 2.75 inches
• Kamp-Rite Double Self Inflating Pad ($113) – 50 x 77 x 4 inches
• Exped SynMat Duo Sleeping Pad (Large) ($279) –51.2 x 77.6 x 2.8 in inches
• GEERTOP 2-Person Self-Inflating Camp Pad Mat Mattress ($80) – 52 x 73 x 1.5 inches
• Lightspeed Outdoors 2 Person Air Bed Mattress ($70) – 55 x 79 x 6.25 inches

And then there’s the Wolfwill SUV Air Bed, which can adjust to fit a variety of sizes.

Of course the other option here is to simply get two single camping mattresses and put them next to each other.

One other thing to keep in mind when buying any camping mattress or sleeping pad is the amount of insulation it will provide. A mattress that’s full of air and nothing else will not insulate as well as a foam mattress, for example. Some pads are hybrids that inflate but also have layers of closed cell foam in them. How well a pad can insulate is conveyed in its R-value, which is stated on the pages above for many of the mattresses. If you camp a lot in cooler temperatures, the R-value is definitely something to look at.

Note: Some of these links are Amazon affiliate links.

For a couple of years now I’ve used sewn rectangles of no-see-um netting and individually wrapped magnets to keep bugs out of my SUV when camping with the windows rolled down. Here’s the latest iteration of the setup in action:

I made an entire video about the setup here, and I explain in the video how you can easily make your own set by using small magnets and duct tape.

If you don’t want to make your own, or if you want something that’s more finished and longer-lasting than the duct tape, I have something for you. I recently discovered a much better and more durable way to encase the magnets, and that is to use a heavy duty nylon fabric that seals onto itself. This creates a tough, waterproof sleeve/housing for the magnets. I’d like to offer these magnetic window screen kits for sale, and I have two of these kits currently for sale to gauge interest. EDIT: Both sets have been sold.

Each kit includes the following:

• 2 no-see-um mesh bug screens (approximately 22 inches high and 40 inches wide). This stuff is much better than traditional mosquito netting; even tiny “no-see-ums” won’t be able to penetrate the screen, but it will still allow plenty of air flow. Make sure this size will fit your window before ordering.
• 24 easy-grab neodyium magnets (12 for each screen). These are very, very strong little magnets of a very high quality. They’re smaller, stronger, and less brittle than ceramic magnets. Each magnet has a little silver dot on one side. This is to mark the polarity of the magnet to make the magnets easier to stack.
• 2 heavy duty reusable plastic zipper bags. You can store the screens and magnets in these bags when they’re not being used. Toss the bag into your seat back pockets (where I keep them), your glove compartment, etc.
• Instructions

Here’s what you’ll be getting with each kit:

And you can view and download the instructions (PDF) by clicking the image below:

I currently have two of these kits for sale. I made just a couple to see if there is enough interest in them to warrant investing in more tools and materials. If so, I’ll make more in the future. I’m selling each set (enough for two windows) for $35, including shipping to anywhere in the lower 48. Final pricing once I make more will be $45 or $50. The reason for the discount? Twofold: 1) I want to quickly gauge if there’s any interest here, and 2) there are some cosmetic blemishes on some of the magnets and the screens (as seen in the images above) that in no way affect their usability.

Interested? Contact me here using the contact form and let me know. I’ll then send you a PayPal request for $35, and you’ll be able to pay with a either a PayPal account or a credit card, but I won’t be able to see or have access to your credit card information (that’s how PayPal works).

Thanks!
Tristan